Swaging is a process that is used to reduce or increase the diameter of tubes. A swaged piece created by placing the tube inside a die that applies compressive force by hammering radially.

Swaging can be further expanded by placing a mandrel inside the tube and applying radial compressive forces on the outer diameter. Thus, throughout the swage process, the inner tube diameter can be a different shape, for example a hexagon, and the outer is still circular.

Swaging Machine Specification :
- Swage Range capability 2 3/8” to 13 3/8” Diameter pipe (For Swaging)
- Horizontal Hydraulic force 350 ton
- Dimensions L 3100MM X W 1300 X H 1900
- Electricity 3 PH.380 V– 440 V Single Phase 220V
- Frequency 50/60 HZ Ampere 62A - Hydraulic power unit 40 HP - MAX Pressure 3000 PSI - Cycle time of the line is 30 – 60 seconds per pipe end depending on diameter.

Standard Accessories :
- Master Collette attachment
- Collette adaptor
- Frame stand cabinet
- Electric panel control
- 2 set std swage Collette or die 1.2” length profile / pipe size with capability to cover 6 pipe Size 2-3/8”, 3-1/2”, 5”, 7”, 9– 5/8”, 13-3/8”.
- 1 set pipe feeder conveyor 10 meter length c/w feeder roller.